格式:pdf
大小:69KB
頁數: 9頁
In order to ensure normal tea chi ng order, pr otecti ng students ' healthy gr owth, e nsuring that national (property) is not l ost, to prevent or minimize t he occurrence of safety accidents, foll ow the "prevent, re scue ea ch ot her, e nsur e safety and reduce l osses" principl e, accor ding to t he local conditi ons, make t he manageme nt system. 1, the pri nci pal is the responsibility of s
格式:pdf
大小:53KB
頁數: 12頁
防排煙系統施工方法 1.施工順序 2.施工說明 風管設計采用鍍鋅鋼板制作安裝;風機采用落地、吊裝形式。 3.施工主要方法 (1)鍍鋅鋼板風管制作加工 本工程風管采用鍍鋅鋼板制作安裝, 風管厚度有 0.5mm、0.75 ㎜ 兩種規格。 工藝流程:圖紙分解→放樣→剪切→倒角→翻邊→壓十字筋→壓 法蘭→咬合→上角→修整成型→角鋼加固→核對制作圖→檢驗入庫 A.關鍵工序:放樣、下料、組合成型為風管制作的重點工序, 為質量控制重點。風管觀感為質量控制的另一重點。 B.施工要點: 風管加工時,應注意克服脹管、豁口,鋼板拉裂等導致嚴重漏風 的通病出現,減小漏風率,保證漏風量≤ 5%的總風量; 應注意克服風管法蘭與風管軸線不垂直,影響觀感的通病出現。 風管制作完后應按國家規范對其尺寸精度和觀感進行驗收。 施工準備 洞口修整 風管工廠制作 支架制作安裝 風口等小型組件安 裝 支管安裝 水平干管安裝 主管安裝